Preliminary Product Information Top

NOTE: Models without lenses (PT-DZ870L/DW830L/DX100L) are also available. The specifications are the same as those of the PT-DZ870/DW830/DX100 respectively. All models are offered in a black (PT-DZ870K/DZ870LK/DW830K/DW830LK/DX100K/DX100LK) or white (PT-DZ870W/DZ870LW/DW830W/
DW830LW/DX100W/DX100LW) cabinet.

• Unique lamp drive systems have helped to make the body compact, while providing a high 8,500 lm*¹ of brightness.
• Full-HD-ready WUXGA resolution.*²
• The dynamic iris achieves a high contrast ratio of 10,000:1.
• Panasonic’s proprietary Dynamic RGB Booster achieves high image quality with excellent color reproduction and brightness.
• Active 3D projection capability.
• Detail Clarity Processor 3 brings depth and clarity to details.
• Waveform Monitor for easy and precise calibration.
• System Daylight View 2 enhances color perception with no need to turn off the lights.
• The DICOM Simulation mode.*³
• Rec. 709 mode for HDTV projection.
• Full 10-bit signal processing.
• Advanced technologies for excellent image quality: 3D color management system, HD IP conversion, digital noise reduction, dynamic sharpness control.

• A dust-resistant optical block keeps images crisp and vivid by preventing dust entry.
• A new cooling mechanism with a heat dissipating block utilizing a heat pipe.
• Panasonic’s unique Dual Lamp System eliminates a sudden interruption if a lamp should fail (in dual-lamp operation mode).
• The Lamp Relay mode also operates the lamps alternately to enable 24/7 projection.
• New lamp and new drive system improve reliability and achieve long life.
• Lamp replacement cycle of up to 3,000 hours.*⁴
• Easy lamp replacement from the rear.
• Optional Smoke-Resistant Filter ET-SFD120 available.

Model		PT-DZ870/DZ870L	PT-DW830/DW830L	PT-DX100/DX100L
Power supply		120 V-240 V AC, 12A, 50/60 Hz
Power consumption		1,130 W (1,180 VA at 120 V) (0.3 W with STANDBY MODE set to ECO,*1 4 W with STANDBY MODE set to NORMAL. Both with fan stopped.)	1,110 W (1,160 VA at 120 V) (0.3 W with STANDBY MODE set to ECO,*1 4 W with STANDBY MODE set to NORMAL. Both with fan stopped.)
DLP™ chip	Panel size	17.0 mm (0.67 in) diagonal (16:10 aspect ratio)	16.5 mm (0.65 in) diagonal (16:10 aspect ratio)	17.8 mm (0.7 in) diagonal (4:3 aspect ratio)
	Display method	DLP™ chip x 1 DLP™ projection system
	Pixels	2,304,000 (1,920 x 1,200) pixels	1,024,000 (1,280 x 800) pixels	786,432 (1,024 x 768) pixels
Lens	PT-DZ870/ DW830/ DX100	Powered zoom (1.7-2.4:1), powered focus F 1.7-1.9, f 25.6-35.7 mm	Powered zoom (1.8-2.5:1), powered focus F 1.7-1.9, f 25.6-35.7 mm
	PT-DZ870L/ DW830L/ DX100L	Optional powered zoom/focus and fixed-focus lens
Lamp		420 W UHM lamp x 2
Screen size (diagonal)		1.27-15.24 m (50-600 in),*2 16:10 aspect ratio		1.27-15.24 m (50-600 in),*2 4:3 aspect ratio
Brightness*3		8,500 lm (dual-lamp, LAMP MODE: NORMAL)		10,000 lm (dual-lamp, LAMP MODE: NORMAL)
Center-to-corner uniformity*3		90 %
Contrast*3		10,000:1 (full on/off, with DYNAMIC IRIS set to ON)
Resolution		1,920 x 1,200 pixels	1,280 x 800 pixels*4	1,024 x 768 pixels*5
Scanning frequency	SDI	SD-SDI*6 / HD-SDI*7 / 3G-SDI*8	-
	HDMI/ DVI-D/ DIGITAL LINK	480i*9, 576i*9, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*10 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
	RGB	fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 20-162 MHz
	YPBPR (YCBCR)	fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 67.50 kHz, fV: 60 Hz [1080/60p] fH: 56.25 kHz, fV: 50 Hz [1080/50p]
	Video/S-Video	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift	Vertical	+50 % (powered)	+60 % (powered)	+50 %*11 (powered)
	Horizontal	±10 % (powered)	±10 % (powered)	±10 % (powered)
Keystone correction range		Vertical: ±40° (±30° with the ET-DLE055/DLE085)
Installation		Ceiling/floor, front/rear, portrait*12
Terminals	SDI IN	BNC x 1 (3G/HD/SD-SDI)	-
	DVI-D IN	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
	HDMI IN	HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
	RGB 1 IN	BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
	RGB 2 IN	D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
	VIDEO IN	BNC x 1 (composite video)
	3D SYNC IN/OUT	BNC x 1 (3D timing signal)
	3D SYNC OUT	BNC x 1 (3D timing signal)
	SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
	SERIAL OUT	D-sub 9-pin (male) x 1 for link control
	REMOTE 1 IN	M3 x 1 for wired remote control
	REMOTE 1 OUT	M3 x 1 for link control (for wired remote control)
	REMOTE 2 IN	D-sub 9-pin (female) x 1 for external control (parallel)
	LAN/ DIGITAL LINK	RJ-45 x 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compatible with PJLink™)
Cabinet materials		Molded plastic
Dimensions (W x H x D)	PT-DZ870/ DW830/ DX100	498 x 200*13 x 556 mm (19-19/32 x 7-7/8*13 x 21-7/8 in) (with supplied lens)
	PT-DZ870L/ DW830L/ DX100L	498 x 200*13 x 513 mm (19-19/32 x 7-7/8*13 x 20-3/16 in) (without lens)
Weight*14	PT-DZ870/ DW830/ DX100	Approx. 20.0 kg (44.1 lbs) (with supplied lens)
	PT-DZ870L/ DW830L/ DX100L	Approx. 19.2 kg (42.3 lbs) (without lens)
Operating temperature		0 °C-45 °C (32 °F-113 °F)*15
Operating humidity		20 %-80 % (no condensation)
Applicable software		Logo Transfer Software, Multi Projector Monitoring & Control Software
		Upgrade kit (ET-UK20)	-
Supplied accessories		Power cord with secure lock, wireless/wired remote control unit, batteries (R6/LR6/AA type x 2), software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) (x 1)

*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate.
     Also, only certain commands can be received for external control using the serial terminal.
*2 1.27−5.08 m (50−200 in) with the ET-DLE055.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.
*5 Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*6 SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i.
*7 SMPTE ST 292 compliant, [YCBCR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p.
*8 SMPTE ST 424 compliant, [YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, [RGB 4:4:4 12-bit/10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p,
    1080/24sF, 1080/30p.
*9 Supports signals with a 27 MHz dot clock (pixel repetition) only.
*10 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*11 +45% from center of screen with the ET-DLE085.
*12 Requires optional lamp units for PORTRAIT MODE.
*13 With legs at shortest position.
*14 Average value. May differ depending on the actual unit.
*15 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the high altitude mode is set to on (for altitudes
       from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F)
       in high altitude mode) when the projector is being used with lamp select set to dual and lamp power set to normal,
       the light output may be reduced approximately 20 % to protect the projector.