Product Information
PT-RZ670 Series
Other Product Information
Product Line-up

Preliminary Product InformationPreliminary Product Information Top

  • PT-RZ670 Series
  • ET-D75LE90
  • ET-ELW22
World’s First* Laser Light Source 1-Chip DLP™ Projectors with 6,500 lm of Brightness

* For 1-chip DLP™ projectors, as of June 2014.

Note: Models without lenses (PT-RZ670LB/RZ670LW/RW630LB/RW630LW) are also available.
          The specifications are the same as those of the PT-RZ670B/RZ670W/RW630B/RW630W respectively.
          All models are offered in a black (PT-RZ670B/RZ670LB/RW630B/RW630LB) or white (PT-RZ670W/RZ670LW/RW630W/RW630LW) cabinet.

Main Features

Benefits of the PT-RZ670 Series

1: Long-Lasting Reliability and High Picture Quality

  • The world’s first*1 brightest 6,500-lm brightness as a laser light source 1-chip DLP™ projector.
  • Bright, beautiful picture quality.

    - Dynamic light control for high 10,000:1*2 contrast ratio.

    - Detail Clarity Processor 3 gives natural clarity to even the finest details.

    - System Daylight View 2 enhances color perception with no need to turn off the lights.

    - Advanced technologies for excellent image quality including full 10-bit signal processing.

    - DICOM Simulation mode reproduces easy-to-view to view rendering of X-ray photos.*3

    - Rec. 709 mode to provide accurate colors.

    - Waveform Monitor for easy and precise calibration.

  • Reliable drive system enables continuous 24/7 operation with no downtime.
  • Features providing superior TCO (total cost of ownership) and value:

    - A laser light source and durable optical system allow approx. 20,000 hours*4 of continuous operation.

    - Long-lasting image quality featuring Constant Brightness mode contributes to long-term applications.

    - A new powerful cooling system maintains quiet, long-term, stable operation while keeping the exhaust heat extremely low.

    - A filter-less, dust-resistant structure with an airtight optical block resist the effects of dust and other particles in the air.

    Brightness Deterioration Comparison

2: Expanding Installation Flexibility

  • Multi-Screen Support System seamlessly connects multiple screens:
    Edge blending, Color matching and Multi-screen processor.
  • Multi-Unit Brightness Control function.
  • Features for flexible layout

    - Lens-centered design.

    - A wide horizontal/vertical lens shift.

    - Omnidirectional installation capability.
    With the PT-RZ670 Series, projection is possible in any direction vertically and horizontally, and the unit can be rotated 360 degrees for installation at any angle.

    The unit can be rotated 360 degrees for installation at any angle.

    - A wide selection of optional lenses including the ET-DLE030 ultra-short throw lens.

  • Geometric Adjustment for specially shaped screens (PT-RZ670).
  • Optional Upgrade Kit ET-UK20 featuring Geometry Manager Pro for more flexible geometric adjustment and modified masking functions (PT-RZ670).
  • Optional ET-CUK10*5 Auto Screen Adjustment Upgrade Kit for
    automatic multi-screen projection setup (PT-RZ670).
The ET-CUK10 allows automatic adjustment for multi-screen projection or curved-screen projection

3: Professional System Integration

  • DIGITAL LINK – the Single Cable Solution

    - Allows transmission of digital signals (HDMI, uncompressed HD video, and control signals) up to 100 m (328 ft) with a single CAT5e cable or higher.

    - The optional ET-YFB100G Digital Interface Box makes setup easy for ceiling-mounted and other permanent installations.

  • Art-Net*6 compatibility simplifies system integration.
  • Abundant terminals, including SDI (3G/HD/SD),*7 DVI-D and HDMI inputs.
  • Multi Projector Monitoring and Control Software allows multiple projectors to be managed together over a wired LAN.
  • Web Browser Control.
  • Optional Early Warning Software ET-SWA100 Series compatible.
  • Other valuable features

    - Shutter function with fade in/out effect. (processing time controllable between 0 and 10 second.)

    - PJLink™ compatible.

    - P-in-P function.*8

    - Scheduling function.

    - Optional ET-MWP100G Multi Window Processor for multi-screen solution.

*1 For 1-chip DLP™ projectors, as of June 2014.

*2 With DYNAMIC CONTRAST mode set to AUTO.

*3 A guideline for light source replacement. The maintenance-free period may be shortened due to environmental conditions.

*4 The PT-RZ670 Series projector is not a medical instrument. Do not use it for actual medical diagnosis.

*5 Available for use worldwide except in the United States. Updates of projector firmware and Geometry Manager Pro software are required.

*6 Art-Net is a protocol for transmitting the lighting control protocol DMX512 over Ethernet.

*7 An SDI input terminal: for the PT-RZ670 only.

*8 This function cannot be used with some input signals and selected inputs.

Specifications (Tentative)

Model PT-RZ670/RZ670L PT-RW630/RW630L
Power supply 120-240 V AC, 8.5 A, 50/60 Hz
Power consumption 720 W (735 VA at 120 V)
(0.4*1 W with STANDBY MODE set to ECO*2,
4 W*1 with STANDBY MODE set to NORMAL.)
DLP™ chip Panel size 17.0 mm (0.67 in)
diagonal (16:10 aspect ratio)
16.5 mm (0.65 in)
diagonal (16:10 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Pixels 2,304,000 (1,920 x 1,200) pixels 1,024,000 (1,280 x 800) pixels
Lens PT-RZ670/
Powered zoom (throw ratio 1.7-2.4:1),
powered focus
F 1.7-1.9, f 25.6-35.7 mm
Powered zoom (throw ratio 1.8-2.5:1),
powered focus
F 1.7-1.9, f 25.6-35.7 mm
Optional powered zoom/focus and fixed-focus lens
Light source Laser diode (dual drive)
Screen size (diagonal) 1.27-15.24 m (50-600 in),
1.27-5.08 m (50-200 in) with the ET-DLE055,
2.54-8.89 m (100-350 in) with the ET-DLE030,
16:10 aspect ratio
Brightness*3 6,500 lm
Center-to-corner uniformity*3 90 %
Contrast*3 10,000:1 (full on/full off, with DYNAMIC CONTRAST on)
Resolution 1,920 x 1,200 pixels 1,280 x 800 pixels*4
Compatible with HDCP, 480i(525i),*8 576i(625i),*8 480p(525p),
576p(625p), 720(750)/60p, 720(750)/50p, 1080(1125)/60i, 1080(1125)/50i,
1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sF, 1080(1125)/30p,
1080(1125)/60p, 1080(1125)/50p, VGA (640 x 480)-WUXGA*9 (1,920 x 1,200)
(compatible with non-interlaced signals only), dot clock: 25-162 MHz.
RGB fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
Video/YC fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis
Vertical +50%, -16% (powered)
Horizontal +30%, -10% (powered)
Keystone correction range Vertical: ±40°*11*12,
horizontal: ±15°*13*14
Vertical: ±40°*15
Keystone correction range with
the optional upgrade kit ET-UK20
Vertical: ±40°*16*17,
horizontal: ±40°*17*18
Installation Ceiling/floor, front/rear
Terminals SDI IN BNC x 1 (3G/HD/SD-SDI) -
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP,
compatible with single link only)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN M3 x 1 for wired remote control
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)
RJ-45 × 1 (for network and DIGITAL LINK
(video/audio/network/serial control) connection,
100Base-TX, compatible with Art-Net,
compliant with PJLink™, Deep Color, compatible with HDCP)
(W x H x D)
498 x 200*19 x 581 mm (19-19/32 x 7-7/8*19 x 22-7/8 in) (with supplied lens)
498 x 200*19 x 538 mm (19-19/32 x 7-7/8*19 x 21-3/16 in) (without lens)
Weight*20 PT-RZ670/
Approx. 23.0 kg (50.7 lbs) or less (with supplied lens)
Approx. 22.3 kg (49.2 lbs) or less (without lens)
Noise level*3 35 dB (LIGHT POWER mode: NORMAL)
Operating environment Operating temperature: 0-45 °C (32-113 °F)*21,
operating humidity: 10%-80% (no condensation)
Supplied accessories Power cord with secure lock x 1, wireless/wired remote control unit x 1,
batteries (R03/AAA type) x 2, software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software) x 1

*1 In standard/graphic picture mode. Measured based on the power consumption rate and a measurement method for the TV receiver.
*2 When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be
    received for external control using the serial terminal.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.
*5 SMPTE ST 424 compliant, [RGB 4:4:4 12-bit/10-bit] 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/25p, 1080 (1125)/24p, 1080 (1125)/24sF,
    1080 (1125)/30p, [YPBPR 4:2:2 10-bit] 1080 (1125)/60p, 1080 (1125)/50p.
*6 SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit] 720 (750)/60p, 720 (750)/50p, 1035 (1125)/60i, 1080 (1125)/60i, 1080 (1125)/50i,
    1080 (1125)/25p, 1080 (1125)/24p, 1080 (1125)/24sF, 1080 (1125)/30p.
*7 SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i (525i), 576i (625i).
*8 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*9 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*10 Optical axis shift cannot be operated with the ET-DLE055/DLE030.
*11 ±30° with the ET-DLE085/DLE055 and +5° with the ET-DLE030.
*12 ±20° (±8° with the ET-DLE085/DLE055) when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function.
*13 When using the KEYSTONE corrections of the Geometric Adjustment function.
*14 ±15° (±8° with the ET-DLE085/DLE055) when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function.
*15 Not operable with the ET-DLE030.
*16 Up to a total of ±55° during simultaneous horizontal and vertical correction.
*17 ±40° with the ET-DLE150/DLE250/supplied lens, ±22° with the ET-DLE085/DLE055 and +5° with the ET-DLE030.
*18 ±15° with the ET-DLE085/DLE055 (±8° when using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function).
*19 With legs at shortest position.
*20 Average value. May differ depending on the actual unit.
*21 When used in locations from 0 m to 4,200 m (0 ft to 13,780 ft) above sea level in NORMAL mode, and from 0 m to 2,700 m (0 ft to 8,858 ft)
      above sea level in other modes.

Optional accessories

Zoom lens

Fixed-focus lens
ET-DLE030   Product Information

Upgrade kit (PT-RZ670 only)
(Geometry Manager Pro included)
ET-CUK10   Product Information
(Auto Screen Adjustment)

Ceiling mount bracket
ET-PKD120H (for high ceilings)
ET-PKD130H (for high ceilings, with 6-axis adjustment)
ET-PKD120S (for low ceilings)
ET-PKD130B (attachment for ceiling mount bracket)

Digital Interface Box
ET-YFB100G   Product Information

Early Warning Software
ET-SWA100 Series   Product Information

Top | PT-RZ670 Series | ET-D75LE90 | ET-ELW22