PT-AE7000/AT5000

Full HD 3D Excitement PT-AE7000/AT5000 2,000 lm Full HD

Stunning Picture Quality with Excellent Dynamic Range

New Red-Rich Lamp

The new 200-W Red-Rich Lamp increases the luminous efficiency of the projector to achieve brighter images with excellent color purity. Able to produce a stunning brightness of 2,000 lm, the PT-AE7000/AT5000 unleashes the beauty of 2D/3D full-HD expression for viewing on various screen sizes.

Full-HD Optimized Optical System

To assure maximum clarity and sharpness in full-HD images, this advanced optical system employs a full-HD-optimized lens unit comprising of 16 lens elements in 12 groups, including two large-diameter aspherical lenses and two high-performance ED (extra-low dispersion) lenses. Each lens is carefully aligned to assure a uniform focusing balance from the center to the edges of the screen. As a result, the PT-AE7000/AT5000 produces stunningly clear and beautiful images.

New up to 480-Hz Compatible LCD Panels

The PT-AE7000/AT5000’s Full-HD LCD panels provide more brightness with higher aperture ratio. The panels are also designed for 480Hz processing capability for brighter 3D image. These high-precision panels use vertically aligned liquid crystal molecules with inorganic alignment layers. When no voltage is applied, the molecules are aligned perpendicular to the glass substrate, so there is minimal light leakage, providing higher contrast.

Pure Contrast Plates Deliver High 300,000:1 Contrast Ratio

The Pure Contrast Plates in the PT-AE7000/AT5000 use a high-precision crystalline material that is carefully matched to the characteristics of the LCD panels to effectively correct the passage of light exiting the panels. This enables the projector to block unwanted light leakage and successfully increases the dynamic range. It works together with the Pure Color Filter Pro and Dynamic Iris Pro to achieve an astounding contrast ratio of 300,000:1.

Pure Color Filter Pro for Rich, Vibrant Colors

The optical filter optimizes the light spectrum from the UHM projector lamp, helping to produce deeper blacks while improving purity levels in the three primary colors (red, green and blue). This advanced filter system improves color purity to cover a range that extends from the HDTV standard (Rec. 709 mode)*1 to the color gamut used in digital cinema*2. This gives images the deep, rich coloring that distinguishes movie images.

*1 A setting that supports the 6,500K color temperature recommended in the HDTV standard (ITU-R BT.709).
*2 Specifications put forth by the Society of Motion Picture and Television Engineers (SMPTE) PR431-2.

The sub iris cuts light leakage.

Dynamic Iris Pro Adds Beauty to Both Dark and Bright Scenes

This intelligent iris system works by analyzing the brightness level of each image using a histogram, then adjusting the lamp power, iris and gamma curve* accordingly to create the ideal image. The adjustments are made virtually frame by frame. This helps the projector achieve a wide dynamic range with swift smoothness for added beauty in both dark and bright scenes.

* Parameters for adjusting the output brightness gradation level according to the input signal.

High-precision iris mechanism
High-precision iris mechanism

Smooth Screen Technology Creates Film-Like Texture

While many LCD projectors suffer from a “chicken wire” effect, Panasonic’s pursuit of the highest possible image quality has successfully overcome this device limitation through the incorporation of Smooth Screen technology.
This uses the double refraction property of crystals to arrange pixels on a screen with no gaps between them.

Seven Picture Modes

Seven different picture modes (normal, dynamic, Rec. 709, D-cinema, cinema 1, cinema 2 and game mode for reduced frame delay) automatically detect 2D, 3D signal for optimized picture quality.

[NORMAL] For a general image such as sports programs.
[DYNAMIC] For viewing at high brightness and sharpness.
[REC. 709] For HDTV standard (ITU-R BT. 709) color temperature of 6,500 K at the default setting of the [PICTURE] menu items.
[D-CINEMA] For D-CINEMA standard (SMPTE RP 431-2) color temperature of 6,300 K at the default setting of the [PICTURE] menu items.
[CINEMA 1] Tuned by top Hollywood colorists for watching a movie with smooth image quality.
[CINEMA 2] For viewing action films and anime etc. with vivid color and sharp quality.
[GAME] For use with games.