PT-AE7000/AT5000

Full HD 3D Excitement PT-AE7000/AT5000 2,000 lm Full HD

Standard Setting-up Positions

PT-AE7000/AT5000

  • unit: mm (inch)
  • L: Distance to screen
    H: Height from the edge of screen to center of lens
NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKA110S.
This illustration is not drawn to scale.
Caution:
• All construction work should be done by a qualified technician.
• When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.

Projection distance (screen aspect ratio 16:9)

NOTE:
The values of L shown above vary due to characteristics of the zoom lens. Images may slightly distort due to characteristics of the zoom lens when the zoom lens is set to the minimum throw distance.

Projection distance (screen aspect ratio 2.35:1)

Projection distance (screen aspect ratio 2.35:1)*

* When projecting both 2.35:1 and 16:9 images onto a 2.35:1 screen using the Lens Memory function.

NOTE:
The values of L shown above vary due to characteristics of the zoom lens. Images may slightly distort due to characteristics of the zoom lens when the zoom lens is set to the minimum throw distance.

Calculation of the projection distance

For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio16 : 9 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0302 - 0.045
L (m) = (diagonal screen size in inches) × 0.0604 - 0.044
Aspect ratio2.35 : 1 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0319 - 0.045
L (m) = (diagonal screen size in inches) × 0.0638 - 0.044
Aspect ratio2.35 : 1 (When projecting both 2.35:1 and 16:9 images onto a 2.35:1 screen using the Lens Memory function.)
  minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0241 - 0.045
L (m) = (diagonal screen size in inches) × 0.0482 - 0.044
NOTE:
The accuracy of calculated value by the formula shown above is ±5%.