PT-DZ6700 Series

1-chip DLP™ Projector PT-DZ6710/PT-DZ6700/PT-DW6300/PT-D6000/PT-D5000
Standard Setting-up Positions
Standard Setting-up Positions with the ET-DLE030
  PT-DZ6710 / DZ6700

Standard setting-up positions
unit : mm (inch)
L: Distance to screen
H: Height from the edge of screen to center of lens

*1 When the lens protrudes to the maximum.
A: 84 mm (3-5/16˝) with the ET-DLE080
17 mm (21/32˝) with the supplied lens
44 mm (1-23/32˝) with the ET-DLE150
45 mm (1-25/32˝) with the ET-DLE250
51 mm (2˝) with the ET-DLE350
95 mm (3-3/4˝) with the ET-DLE450
27 mm (1-1/16˝) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16˝) steps.

NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKD56H and an optional lens.
This illustration is not drawn to scale.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 16:10)

• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

NOTE:
When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

Projection distance (screen aspect ratio 16:9)

• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

NOTE:
When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

Projection distance (screen aspect ratio 4:3)

• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

NOTE:
When the ET-DLE055 is mounted, the optical lens shift function cannot be used.


Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10

  ET-DLE080 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0174 - 0.0471
L (m) = (diagonal screen size in inches) x 0.0216 - 0.0442

  ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0286 - 0.0540
L (m) = (diagonal screen size in inches) x 0.0413 - 0.0498

  Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0395 - 0.0745
L (m) = (diagonal screen size in inches) x 0.0529 - 0.0734

  ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0500 - 0.0800
L (m) = (diagonal screen size in inches) x 0.0789 - 0.0792

  ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0787 - 0.1351
L (m) = (diagonal screen size in inches) x 0.1190 - 0.1346

  ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.1192 - 0.3017
L (m) = (diagonal screen size in inches) x 0.1885 - 0.2991

  ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) x 0.0175 - 0.0476

Aspect ratio 16 : 9

  ET-DLE080 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0179 - 0.0471
L (m) = (diagonal screen size in inches) x 0.0222 - 0.0442

  ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0294 - 0.0540
L (m) = (diagonal screen size in inches) x 0.0424 - 0.0498

  Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0406 - 0.0745
L (m) = (diagonal screen size in inches) x 0.0544 - 0.0734

  ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0513 - 0.0800
L (m) = (diagonal screen size in inches) x 0.0811 - 0.0792

  ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0809 - 0.1351
L (m) = (diagonal screen size in inches) x 0.1223 - 0.1346

  ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.1225 - 0.3017
L (m) = (diagonal screen size in inches) x 0.1937 - 0.2991

  ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) x 0.0180 - 0.0476

Aspect ratio 4 : 3

  ET-DLE080 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0197 - 0.0471
L (m) = (diagonal screen size in inches) x 0.0244 - 0.0442

  ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0324 - 0.0540
L (m) = (diagonal screen size in inches) x 0.0467 - 0.0498

  Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0447 - 0.0745
L (m) = (diagonal screen size in inches) x 0.0599 - 0.0734

  ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0565 - 0.0800
L (m) = (diagonal screen size in inches) x 0.0893 - 0.0792

  ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0891 - 0.1351
L (m) = (diagonal screen size in inches) x 0.1347 - 0.1346

  ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.1350 - 0.3017
L (m) = (diagonal screen size in inches) x 0.2133 - 0.2991

  ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) x 0.0198 - 0.0476

• Distances calculated with the above equations will include a slight error.
  PT-DW6300S
Standard setting-up positions
unit : mm (inch)
L: Distance to screen
H: Height from the edge of screen to center of lens

*1 When the lens protrudes to the maximum.
A: 84 mm (3-5/16˝) with the ET-DLE080
17 mm (21/32˝) with the supplied lens
44 mm (1-23/32˝) with the ET-DLE150
45 mm (1-25/32˝) with the ET-DLE250
51 mm (2˝) with the ET-DLE350
95 mm (3-3/4˝) with the ET-DLE450
27 mm (1-1/16˝) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16˝) steps.

NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKD56H and an optional lens.
This illustration is not drawn to scale.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 16:10)

• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

NOTE:
When the ET-DLE055 is mounted, the optical lens shift function cannot be used.

Projection distance (screen aspect ratio 16:9)

• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.

NOTE:
When the ET-DLE055 is mounted, the optical lens shift function cannot be used.


Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10

  ET-DLE080 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0183 - 0.0471
L (m) = (diagonal screen size in inches) x 0.0227 - 0.0442

  ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0300 - 0.0540
L (m) = (diagonal screen size in inches) x 0.0433 - 0.0498

  Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0397 - 0.0650
L (m) = (diagonal screen size in inches) x 0.0524 - 0.0638

  ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0524 - 0.0800
L (m) = (diagonal screen size in inches) x 0.0828 - 0.0792

  ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0827 - 0.1351
L (m) = (diagonal screen size in inches) x 0.1249 - 0.1346

  ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.1251 - 0.3017
L (m) = (diagonal screen size in inches) x 0.1979 - 0.2991

  ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) x 0.0184 - 0.0476

Aspect ratio 16 : 9

  ET-DLE080 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0188 - 0.0471
L (m) = (diagonal screen size in inches) x 0.0233 - 0.0442

  ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0309 - 0.0540
L (m) = (diagonal screen size in inches) x 0.0445 - 0.0498

  Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0408 - 0.0650
L (m) = (diagonal screen size in inches) x 0.0539 - 0.0638

  ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0539 - 0.0800
L (m) = (diagonal screen size in inches) x 0.0851 - 0.0792

  ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0850 - 0.1351
L (m) = (diagonal screen size in inches) x 0.1284 - 0.1346

  ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.1286 - 0.3017
L (m) = (diagonal screen size in inches) x 0.2034 - 0.2991

  ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) x 0.0189 - 0.0476

• Distances calculated with the above equations will include a slight error.
  PT-D6000S / D5000S
Standard setting-up positions
unit : mm (inch)
L: Distance to screen
H: Height from the edge of screen to center of lens

*1 When the lens protrudes to the maximum.
A: 84 mm (3-5/16˝) with the ET-DLE080
17 mm (21/32˝) with the supplied lens
44 mm (1-23/32˝) with the ET-DLE150
45 mm (1-25/32˝) with the ET-DLE250
51 mm (2˝) with the ET-DLE350
95 mm (3-3/4˝) with the ET-DLE450
27 mm (1-1/16˝) with the ET-DLE055
*2 Adjustable in 40 mm (1-9/16˝) steps.

NOTE:
Illustrations show the projector installed using optional ceiling mount bracket ET-PKD56H and an optional lens.
This illustration is not drawn to scale.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 4:3)


• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• The zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• The brightness varies depending on the zoom setting.


• The value for L (distance to screen) varies slightly within ±5% depending on the zoom lens characteristics.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.

NOTE:
When the ET-DLE055 is mounted, the optical lens shift function cannot be used.


Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 4 : 3

  ET-DLE080 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0170 - 0.0471
L (m) = (diagonal screen size in inches) x 0.0211 - 0.0442

  ET-DLE150 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0280 - 0.0540
L (m) = (diagonal screen size in inches) x 0.0403 - 0.0498

  Supplied lens minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0370 - 0.0650
L (m) = (diagonal screen size in inches) x 0.0488 - 0.0638

  ET-DLE250 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0488 - 0.0800
L (m) = (diagonal screen size in inches) x 0.0771 - 0.0792

  ET-DLE350 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.0770 - 0.1351
L (m) = (diagonal screen size in inches) x 0.1163 - 0.1346

  ET-DLE450 minimum
maximum
L (m) = (diagonal screen size in inches) x 0.1165 - 0.3017
L (m) = (diagonal screen size in inches) x 0.1842 - 0.2991

  ET-DLE055 (fixed focus) L (m) = (diagonal screen size in inches) x 0.0171 - 0.0476

• Distances calculated with the above equations will include a slight error.