go to main contents

Header area begins from here.

• Global Home
• Products & Solutions
• Support
• Site Map

		PT-DW5100/DW5100L PT-D5700/D5700L PT-D4000

PT-DW5100/DW5100L

		PT-DW5100 / DW5100L
System		DLP™ Projection system
Device		0.65" (diagonal) DLP™ chip 15:9
Pixels		983,040 (1,280 x 768) x 1 total of 983,040 pixels
Lamp		275 W UHM lamp x 2 (Dual Lamp System)
Brightness (normal lamp)*1		5,500 lumens (dual lamp, high power mode)
Contrast ratio*1		2,000:1 (full on/full off, contrast mode: high)
Resolution	RGB	1,280 x 768 pixels
	Video	560 TV lines
Lens	PT-DW5100	Powered zoom/focus lens, Supplied lens: (1.8-2.4:1) F = 1.7-2.0, f = 25.6-33.8 mm
	PT-DW5100L	Optional powered zoom/focus lenses
Screen size		50 - 600 inches
Lens shift		Vertical (powered), horizontal (manual)
RGB input scanning frequency		fH 15-91 kHz, fv 50-85 Hz Dot clock 150 MHz or lower
Component signal		480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i, 1080/60p 1080/50i, 1080/50p
Video signal		NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
Terminals	VIDEO IN	BNC
	S-VIDEO IN	Mini DIN 4-pin
	RGB1/YPBPR IN	BNC x 5
	RGB2 IN	D-sub HD 15-pin
	DVI-D IN	24pin DVI 1.0 compliant, HDCP compatible, for single link
	RS-232C IN	D-sub 9-pin female
	RS-232C OUT	D-sub 9-pin male
	REMOTE 1 IN	M3 jack
	REMOTE 1 OUT	M3 jack
	REMOTE 2 IN	D-sub 9-pin female (parallel)
	LAN	RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX
Keystone correction range		±30° (with standard lens)
Installation		Front/rear, ceiling/floor
Power cord length		9.9' (3.0m)
Power supply	PT-DW5100U/DW5100UL (North America)	120 V AC, 60 Hz
	PT-DW5100E/DW5100EL (Europe, Asia)	220-240 V AC, 50/60 Hz
Power consumption	PT-DW5100U/DW5100UL (North America)	770 W (770 VA) (10 W during standby mode with fan stopped)
	PT-DW5100E/DW5100EL (Europe, Asia)	750 W (790 VA) (15 W during standby mode with fan stopped)
Dimensions (W x H x D)		20-7/8' x 6-9/16' x 16-7/8' (530 x 167 x 429 mm) (without lens)
Weight	PT-DW5100	30.6 lbs (13.9 kg) with supplied lens
	PT-DW5100L	28.9 lbs (13.1 kg) without lens
Operating temperature		32 -113 °F (0 -45 °C)
Operating humidity		20-80% (no condensation)
Supplied accessories		Power cord, Wireless/wired remote control unit, Batteries for remote control ( AA type for North/South America, R6/LR6 type for Europe / Asia) x 2, Wire rope

*1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

Standard setting-up position (when installed using the ET-PKD56H)

*1 When the lens protrudes to the maximum. 185 mm (7-9/32˝) with the supplied lens 177 mm (6-31/32˝) with the ET-DLE050 209 mm (8-7/32˝) with the ET-DLE100 208 mm (8-3/16˝) with the ET-DLE200 220 mm (8-21/32˝) with the ET-DLE310 209 mm (8-7/32˝) with the ET-DLE410 *2 Adjustable in 40 mm (1-9/16˝) steps.   unit : mm (inch)

Standard setting-up position (when installed using the ET-PKD55S)

		*3 When the lens protrudes to the maximum. 180 mm (7-3/32˝) with the supplied lens 172 mm (6-25/32˝) with the ET-DLE050 204 mm (8-1/32˝) with the ET-DLE100 203 mm (8˝) with the ET-DLE200 215 mm (8-15/32˝) with the ET-DLE310 204 mm (8-1/32˝) with the ET-DLE410   unit : mm (inch)
		NOTE: Illustrations show the projector installed using optional ceiling bracket. This illustration is not drawn to scale. Values shown are approximate. The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. When the shortest projection distance (min.) is used, a small amount of distortion may occur in the image due to the zoom lens characteristics.

Projection distance for 15:9 aspect ratio screen (millimeters)

Projection distance for 15:9 aspect ratio screen (feet)

Projection distance for 16:9 aspect ratio screen (millimeters)

Projection distance for 16:9 aspect ratio screen (feet)

• The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. • At the shortest projection distance, the zoom lens characteristics may cause slight image distortion. • When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size. • For the ET-DLE050, the height from the edge of the screen to the center of the lens (H) is 1/2 of the screen height. • The brightness varies depending on the zoom settings. • The height of images from 4:3 aspect ratio sources is slightly larger than that of images from 16:9 sources. If images from 4:3 sources do not fit the screen, set the aspect ratio to "S4:3".

Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio	15 : 9		ET-DLE100		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0300 - 0.0452 L (mm) = (diagonal screen size in inches) x 0.0404 - 0.0478
			Supplied lens		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0402 - 0.0650 L (mm) = (diagonal screen size in inches) x 0.0530 - 0.0638
			ET-DLE200		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0547 - 0.0657 L (mm) = (diagonal screen size in inches) x 0.0895 - 0.0758
			ET-DLE310		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0786 - 0.1062 L (mm) = (diagonal screen size in inches) x 0.1026 - 0.1056
			ET-DLE410		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.1044 - 0.1374 L (mm) = (diagonal screen size in inches) x 0.1951 - 0.1352
			ET-DLE050		(fixed focus)		L (mm) = (diagonal screen size in inches) x 0.0180 - 0.0361

Aspect ratio	16 : 9		ET-DLE100		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0305 - 0.0452 L (mm) = (diagonal screen size in inches) x 0.0411 - 0.0478
			Supplied lens		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0409 - 0.0650 L (mm) = (diagonal screen size in inches) x 0.0539 - 0.0638
			ET-DLE200		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0556 - 0.0657 L (mm) = (diagonal screen size in inches) x 0.0910 - 0.0758
			ET-DLE310		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0799 - 0.1062 L (mm) = (diagonal screen size in inches) x 0.1043 - 0.1056
			ET-DLE410		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.1061 - 0.1374 L (mm) = (diagonal screen size in inches) x 0.1983 - 0.1352
			ET-DLE050		(fixed focus)		L (mm) = (diagonal screen size in inches) x 0.0183 - 0.0361

• Distances calculated with the above equations will include a slight error. • When an SXGA signal is input, the left and right edges of the image are blanked, and the image is projected at a screen aspect ratio of 5:4. • The brightness varies depending on the zoom setting.

PT-D5700/D5700L

		PT-D5700 / D5700L
System		DLP™ Projection system
Device		0.7" (diagonal) DLP™ chip 4:3
Pixels		786,432 (1,024 x 768) x 1 total of 786,432 pixels
Lamp		275 W UHM lamp x 2 (Dual Lamp System)
Brightness (normal lamp)*1		6,000 lumens (dual lamp, high power mode)
Contrast ratio*1		2,000:1 (full on/full off, contrast mode: high)
Resolution	RGB	1,024 x 768 pixels
	Video	560 TV lines
Lens	PT-D5700	Powered zoom/focus lens, Supplied lens: (1.8-2.4:1) F = 1.7-2.0, f = 25.6-33.8 mm
	PT-D5700L	Optional powered zoom/focus lenses
Screen size		50 - 600 inches
Lens shift		Vertical (powered), horizontal (manual)
RGB input scanning frequency		fH 15-91 kHz, fv 50-85 Hz Dot clock 150 MHz or lower
Component signal		480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i, 1080/60p 1080/50i, 1080/50p
Video signal		NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
Terminals	VIDEO IN	BNC
	S-VIDEO IN	Mini DIN 4-pin
	RGB1/YPBPR IN	BNC x 5
	RGB2 IN	D-sub HD 15-pin
	DVI-D IN	24pin DVI 1.0 compliant, HDCP compatible, for single link
	RS-232C IN	D-sub 9-pin female
	RS-232C OUT	D-sub 9-pin male
	REMOTE 1 IN	M3 jack
	REMOTE 1 OUT	M3 jack
	REMOTE 2 IN	D-sub 9-pin female (parallel)
	LAN	RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX
Keystone correction range		±30° (with standard lens)
Installation		Front/rear, ceiling/floor
Power cord length		9.9' (3.0m)
Power supply	PT-D5700U/D5700UL (North America)	120 V AC, 60 Hz
	PT-D5700E/D5700EL (Europe, Asia)	220-240 V AC, 50/60 Hz
Power consumption	PT-D5700U/D5700UL (North America)	770 W (770 VA) (10 W during standby mode with fan stopped)
	PT-D5700E/D5700EL (Europe, Asia)	750 W (790 VA) (15 W during standby mode with fan stopped)
Dimensions (W x H x D)		20-7/8' x 6-9/16' x 16-7/8' (530 x 167 x 429 mm) (without lens)
Weight	PT-D5700	30.6 lbs (13.9 kg) with supplied lens
	PT-D5700L	28.9 lbs (13.1 kg) without lens
Operating temperature		32 -113 °F (0 -45 °C)
Operating humidity		20-80% (no condensation)
Supplied accessories		Power cord, Wireless/wired remote control unit, Batteries for remote control ( AA type for North/South America, R6/LR6 type for Europe / Asia) x 2, Wire rope

*1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

Standard setting-up position (when installed using the ET-PKD56H)

*3 When the lens protrudes to the maximum. 185 mm (7-9/32˝) with the supplied lens 177 mm (6-31/32˝) with the ET-DLE050 209 mm (8-7/32˝) with the ET-DLE100 208 mm (8˝-3/16˝) with the ET-DLE200 196 mm (7-23/32˝) with the ET-DLE300 196 mm (7-23/32˝) with the ET-DLE400 *4 Adjustable in 40 mm (1-9/16˝) steps.   unit : mm (inch)

Standard setting-up position (when installed using the ET-PKD55S)

		*3 When the lens protrudes to the maximum. 180 mm (7-3/32˝) with the supplied lens 172 mm (6-25/32˝) with the ET-DLE050 204 mm (8-1/32˝) with the ET-DLE100 203 mm (8˝) with the ET-DLE200 191 mm (7˝-17/32˝) with the ET-DLE300 191 mm (7-17/32˝) with the ET-DLE400   unit : mm (inch)
		NOTE: Illustrations show the projector installed using optional ceiling bracket. This illustration is not drawn to scale. Values shown are approximate. The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. When the shortest projection distance (min.) is used, a small amount of distortion may occur in the image due to the zoom lens characteristics.

Projection distance for 4:3 aspect ratio screen (millimeters)

Projection distance for 4:3 aspect ratio screen (feet)

• The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. • At the shortest projection distance, the zoom lens characteristics may cause slight image distortion. • When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size. • For the ET-DLE050, the height from the edge of the screen to the center of the lens (H) is 1/2 of the screen height. • The brightness varies depending on the zoom setting.

Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio	4 : 3		ET-DLE100		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0276 - 0.0452 L (mm) = (diagonal screen size in inches) x 0.0372 - 0.0478
			Supplied lens		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0370 - 0.0650 L (mm) = (diagonal screen size in inches) x 0.0488 - 0.0638
			ET-DLE200		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0504 - 0.0657 L (mm) = (diagonal screen size in inches) x 0.0824 - 0.0758
			ET-DLE310		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0697 - 0.1062 L (mm) = (diagonal screen size in inches) x 0.0910 - 0.1056
			ET-DLE410		minimum maximum		L (mm) = (diagonal screen size in inches) x 0.0926 - 0.1374 L (mm) = (diagonal screen size in inches) x 0.1730 - 0.1352
			ET-DLE050		(fixed focus)		L (mm) = (diagonal screen size in inches) x 0.0166 - 0.0361

• Distances calculated with the above equations will include a slight error. • When an SXGA signal is input, the left and right edges of the image are blanked, and the image is projected at a screen aspect ratio of 5:4. • The brightness varies depending on the zoom setting.

PT-D4000

		PT-D4000
System		DLP™ Projection system
Device		0.7" (diagonal) DLP™ chip 4:3
Pixels		786,432 (1,024 x 768) x 1 total of 786,432 pixels
Lamp		210 W UHM lamp x 2 (Dual Lamp System)
Brightness (normal lamp)*1		4,000 lumens (dual lamp, high power mode)
Contrast ratio*1		1,600:1 (full on/full off, contrast mode: high)
Resolution		1,024 x 768 pixels
Lens		Powered zoom/focus lens, Supplied lens: (1.8-2.4:1) F = 1.7-2.0, f = 25.6-33.8 mm
Screen size		50 - 600 inches
Lens shift		Vertical (powered), horizontal (manual)
RGB input scanning frequency		fH 15-91 kHz, fv 50-85 Hz Dot clock 150 MHz or lower
Component signal		480i, 480p, 576i, 576p, 720/60p, 720/50p, 1080/60i, 1080/60p 1080/50i, 1080/50p
Video signal		NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM
Terminals	VIDEO IN	BNC
	S-VIDEO IN	Mini DIN 4-pin
	RGB1/YPBPR IN	BNC x 5
	RGB2 IN	D-sub HD 15-pin
	DVI-D IN	24pin DVI 1.0 compliant, HDCP compatible, for single link
	RS-232C IN	D-sub 9-pin female
	RS-232C OUT	D-sub 9-pin male
	REMOTE 1 IN	M3 jack
	REMOTE 1 OUT	M3 jack
	REMOTE 2 IN	D-sub 9-pin female (parallel)
	LAN	RJ-45x1, compliant with PJLink™ (class 1), 10Base-T/100Base-TX
Keystone correction range		±30° (with standard lens)
Installation		Front/rear, ceiling/floor
Power cord length		9.10' (3.0m)
Power supply	PT-D4000U (North America)	120 V AC, 50 / 60 Hz
	PT-D4000E (Europe, Asia)	220-240 V AC, 50 / 60 Hz
Power consumption	PT-D4000U (North America)	540 W (540 VA) (10 W during standby mode with fan stopped)
	PT-D4000E (Europe, Asia)	520 W (570 VA) (15 W during standby mode with fan stopped)
Dimensions (W x H x D)		20-7/8' x 6-9/16' x 17-3/8' (530 x 167 x 441 mm)
Weight		30.2 lbs (13.7 kg) with supplied lens
Operating temperature		32 -113 °F (0 -45 °C)
Operating humidity		20-80% (no condensation)
Supplied accessories		Power cord, Wireless/wired remote control unit, Batteries for remote control ( AA type for North/South America, R6/LR6 type for Europe / Asia) x 2, Wire rope

*1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.

Standard setting-up position

*3 When the lens protrudes to the maximum. 212 mm (8-11/32˝) with the ET-DLE150 213 mm (8-3/8˝) with the ET-DLE250 219 mm (8-5/8˝) with the ET-DLE350 263 mm (10-11/32˝) with the ET-DLE450 195 mm (7-11/16˝) with the ET-DLE055 *4 Adjustable in 40 mm (1-9/16˝) steps.   unit : mm (inch)

Projection distance for 4:3 aspect ratio screen (millimeters)

Projection distance for 4:3 aspect ratio screen (feet)

• The value for L (distance to screen) varies slightly depending on the zoom lens characteristics. • At the shortest projection distance, the zoom lens characteristics may cause slight image distortion. • When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size. • The brightness varies depending on the zoom settings.

Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio	4 : 3		ET-DLE150		minimum maximum		L (mm) = (diagonal screen size in inches) x 28.0 - 54.0 L (mm) = (diagonal screen size in inches) x 40.3 - 49.8
			Supplied lens		minimum maximum		L (mm) = (diagonal screen size in inches) x 37.1 - 51 L (mm) = (diagonal screen size in inches) x 49.0 - 50
			ET-DLE250		minimum maximum		L (mm) = (diagonal screen size in inches) x 48.8 - 80.0 L (mm) = (diagonal screen size in inches) x 77.1 - 79.2
			ET-DLE350		minimum maximum		L (mm) = (diagonal screen size in inches) x 77.0 - 135.1 L (mm) = (diagonal screen size in inches) x 116.3 - 134.6
			ET-DLE450		minimum maximum		L (mm) = (diagonal screen size in inches) x 116.5 - 301.7 L (mm) = (diagonal screen size in inches) x 184.2 - 299.1
			ET-DLE055		(fixed focus)		L (mm) = (diagonal screen size in inches) x 17.1 - 47.6

• Distances calculated with the above equations will include a slight error. • When an SXGA signal is input, the left and right edges of the image are blanked, and the image is projected at a screen aspect ratio of 5:4. • The brightness varies depending on the zoom setting.

• Terms of Use
• Privacy

© Panasonic Corporation 2009