PT-DZ570 Series

1-Chip DLP™ Projector PT-DZ570, PT-DW530, PT-DX500
Improved Reliability and Reduced Maintenance
Newly Designed Original Cooling System

The cooling system is newly designed to optimize the airflow inside the unit. As a result, it offers better cooling efficiency and allows the projector to be used in ambient temperatures up to 45°C (113°F).*

* The operating temperature range is 0°C to 40°C (32°F to 104°F ) when the fan control is set to HIGH Altitude mode ( for over 1,400 m [4,593 ft ] to 2,700 m [8,858 ft ] above sea level ).

Lamp and Lamp Air Filter Replacement Cycle of 2,000 Hours*

The new cooling system combines with a dust-resistant design based on a sealed optical block to achieve a lamp and lamp air filter replacement cycle of 2,000 hours.* This greatly reduces maintenance hassles.

* When a lamp mode is set to NORMAL. The lamp replacement cycle is 3,000 hours when the lamp mode is set to ECO. A maximum value when the lamp is used in cycles of being turned on for 2 hours and off for 0.25 hours. When the lamp is turned on and off more frequently, the lamp replacement cycle is shortened.

Easy Lamp Replacement

For easier maintenance, you can replace the lamp from the rear. The lamp is easily replaced even after the projector is installed on the ceiling.

Quiet 29 dB* Operation

An original cooling system enhances the compact body and enables the projector to operate at a quiet 29 dB.*

* When the lamp mode is set to ECO; 35 dB when the lamp mode is set to Normal. Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.

Web Browser Control over a Wired LAN Network
Web Browser Control over a Wired LAN
The PT-DZ570 Series can be easily operated remotely over a LAN, because it is done using the computer’s Web browser. Furthermore, the projector sends an email message to notify the operator when an error has occurred, or a lamp needs to be replaced.

PJLink™ Compatibility
The LAN terminals support PJLink™ class 1 connection. Control with the same specifications is also possible when used in a multi-projector system with projectors of another brand.
PJLink™

Multi Projector Monitoring and Control
Software Ver. 2

Panasonic’s original freeware “Multi Projector Monitoring and Control Software Ver. 2” allows the user to control and monitor multiple projectors at the same time over a wired LAN. When a problem occurs, an alarm message is sent to the monitoring/controlling PC.

Basic Concept of the Multi Projector Monitoring and Control Software