Head on this page.

Panasonic Global
Search Panasonic Global Site

PT-DZ570 Series

1-Chip DLP™ Projector PT-DZ570, PT-DW530, PT-DX500
Excellent Image QualityImproved Reliability and Reduced MaintenanceInstallation/Operation Flexibility
Main Parts and Controls Specifications Standard Setting-up Positions Optional Accessories
Specifications
  PT-DZ570

  PT-DZ570
DLP™ chip Panel size 17.0 mm (0.67 inches) diagonal, 16:10 aspect ratio
Display method DLP™ chip x 1, DLP™ projection system
Pixels 2,304,000 (1,920 x 1,200) pixels
Lens Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0 mm
Lamp 300 W (max. 310 W) UHM lamp
Screen size 1.02-7.62 m (40-300 inches), 16:10 aspect ratio
Brightness*1 4,000 lumens (lamp mode: NORMAL)
Center-to-corner uniformity*1 90%
Contrast*1 2,000:1 (full on/full off)
Resolution 1,920 x 1,200 pixels
Scanning frequency HDMI/DVI-D fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz
RGB fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) 480i (525i): fH 15.75 kHz; fV 60 Hz
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.50 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720 (750)/60p: fH 45.00 kHz; fV 60 Hz
720 (750)/50p: fH 37.50 kHz; fV 50 Hz
1035/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz
1080/25p: fH 28.13 kHz; fV 25 Hz
1080/24p: fH 27.00 kHz; fV 24 Hz
1080/24sF: fH 27.00 kHz; fV 48 Hz
1080/30p: fH 33.75 kHz; fV 30 Hz
1080/60p: fH 67.50 kHz; fV 60 Hz
1080/50p: fH 56.25 kHz; fV 50 Hz
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical +60% from center of screen (manual)
Horizontal ±10% from center of screen (manual)
Keystone correction range Vertical ±40ﾟ
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480) -WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
RGB 1 IN BNC x 5 (RGB/ YPBPR x 1)
RGB 2 IN D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
AUDIO IN 1 RCA x 2 (L, R x 1), 0.5 Vrms
AUDIO IN 2 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO IN 3 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO OUT M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN D-sub 9-pin (female) x 1 for external control (contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200 x 1
Power cord length 3.0 m (9 ft 10 in)
Power supply 100-240 V AC, 5.0-1.9 A, 50/60 Hz
Power consumption 415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO*3, 15 W with standby mode set to NORMAL)
Dimensions (W x H x D) 332 x 168*4 x 484.5 mm (13-1/16˝ x 6-5/8˝*4 x 19-1/16˝ ) (including the lens)
Weight Approximately 8.5 kg (18.7 lbs.)
Operating temperature 0°C-45°C (32°F-113°F)
Operating humidity 20%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)

*1:  Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
*2:  Compliant with VESA CVT-RB.
*3:  When the standby mode is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*4:  With legs at shortest position.
Return to Top
  PT-DW530

  PT-DW530
DLP™ chip Panel size 16.5 mm (0.65 inches) diagonal, 16:10 aspect ratio
Display method DLP™ chip x 1, DLP™ projection system
Pixels 1,024,000 (1,280 x 800) pixels
Lens Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0 mm
Lamp 300 W (max. 310 W) UHM lamp
Screen size 1.02-7.62 m (40-300 inches), 16:10 aspect ratio
Brightness*1 4,000 lumens (lamp mode: NORMAL)
Center-to-corner uniformity*1 90%
Contrast*1 2,000:1 (full on/full off)
Resolution 1,280 x 800 pixels (Input signals that exceed this resolution will be
converted to 1,280 x 800 pixels.
Scanning frequency HDMI/DVI-D fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz
RGB fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) 480i (525i): fH 15.75 kHz; fV 60 Hz
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.50 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720 (750)/60p: fH 45.00 kHz; fV 60 Hz
720 (750)/50p: fH 37.50 kHz; fV 50 Hz
1035/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz
1080/25p: fH 28.13 kHz; fV 25 Hz
1080/24p: fH 27.00 kHz; fV 24 Hz
1080/24sF: fH 27.00 kHz; fV 48 Hz
1080/30p: fH 33.75 kHz; fV 30 Hz
1080/60p: fH 67.50 kHz; fV 60 Hz
1080/50p: fH 56.25 kHz; fV 50 Hz
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical +70% from center of screen (manual)
Horizontal ±10% from center of screen (manual)
Keystone correction range Vertical ±40°
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480) -WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
RGB 1 IN BNC x 5 (RGB/ YPBPR x 1)
RGB 2 IN D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
AUDIO IN 1 RCA x 2 (L, R x 1), 0.5 Vrms
AUDIO IN 2 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO IN 3 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO OUT M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN D-sub 9-pin (female) x 1 for external control (contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200 x 1
Power cord length 3.0 m (9 ft 10 in)
Power supply 100-240 V AC, 5.0-1.9 A, 50/60 Hz
Power consumption 415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO*3, 15 W with standby mode set to NORMAL)
Dimensions (W x H x D) 332 x 168*4 x 484.5 mm (13-1/16˝ x 6-5/8˝ *4 x 19-1/16˝ ) (including the lens)
Weight Approximately 8.5 kg (18.7 lbs.)
Operating temperature 0°C-45°C (32°F-113°F)
Operating humidity 20%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)

*1:  Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
*2:  Compliant with VESA CVT-RB.
*3:  When the standby mode is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*4:  With legs at shortest position.
Return to Top
  PT-DX500

  PT-DX500
DLP™ chip Panel size 17.8 mm (0.70 inches) diagonal (4:3 aspect ratio)
Display method DLP™ chip x 1, DLP™ projection system
Pixels 786,432 (1,024 x 768) pixels
Lens Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0 mm
Lamp 300 W (max. 310 W) UHM lamp
Screen size 1.02-7.62 m (40- 300 inches), 4:3 aspect ratio
Brightness*1 4,500 lumens (lamp mode: NORMAL)
Center-to-corner uniformity*1 90%
Contrast*1 2,000:1 (full on/full off)
Resolution 1,024 x 768 pixels (Input signals that exceed this resolution will be
converted to 1,024 x 768 pixels.)
Scanning frequency HDMI/DVI-D fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz
RGB fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower
YPBPR (YCBCR) 480i (525i): fH 15.75 kHz; fV 60 Hz
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.50 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720 (750)/60p: fH 45.00 kHz; fV 60 Hz
720 (750)/50p: fH 37.50 kHz; fV 50 Hz
1035/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz
1080/25p: fH 28.13 kHz; fV 25 Hz
1080/24p: fH 27.00 kHz; fV 24 Hz
1080/24sF: fH 27.00 kHz; fV 48 Hz
1080/30p: fH 33.75 kHz; fV 30 Hz
1080/60p: fH 67.50 kHz; fV 60 Hz
1080/50p: fH 56.25 kHz; fV 50 Hz
Video/S-Video fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shift Vertical +60% from center of screen (manual)
Horizontal ±10% from center of screen (manual)
Keystone correction range Vertical ±40ﾟ
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480) -WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
RGB 1 IN BNC x 5 (RGB/ YPBPR x 1)
RGB 2 IN D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
AUDIO IN 1 RCA x 2 (L, R x 1), 0.5 Vrms
AUDIO IN 2 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO IN 3 M3 x 1 (L, R x 1), 0.5 Vrms
AUDIO OUT M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable)
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN D-sub 9-pin (female) x 1 for external control (contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200 x 1
Power cord length 3.0 m (9 ft 10 in)
Power supply 100-240 V AC, 5.0-1.9 A, 50/60 Hz
Power consumption 415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO*3, 15 W with standby mode set to NORMAL)
Dimensions (W x H x D) 332 x 168*4 x 484.5 mm (13-1/16˝ x 6-5/8˝ *4 x 19-1/16˝ ) (including the lens)
Weight Approximately 8.5 kg (18.7 lbs.)
Operating temperature 0°C-45°C (32°F-113°F)
Operating humidity 20%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)

*1:  Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
*2:  Compliant with VESA CVT-RB.
*3:  When the standby mode is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
*4:  With legs at shortest position.


NOTES ON USE
1  Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
2  The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3 The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C (104°F). Also, make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
4 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
5 Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.

Return to Top