PT-DZ8700/DZ110X Series

3-Chip DLP™ Projector PT-DZ8700/DZ110X, PT-DS8500/DS100X, PT-DW8300/DW90X
Standard Setting-up Positions
  PT-DZ8700 / DZ110X

Standard setting-up positions
unit : mm (inch)
L: Distance to screen
H: Height from the edge of screen to center of lens

*1 When the lens protrudes to the maximum.
212 mm (8-11/32 in) with the ET-D75LE6
125 mm (4-29/32 in) with the ET-D75LE10
121 mm (4-3/4 in) with the ET-D75LE20
121 mm (4-3/4 in) with the ET-D75LE30
124 mm (4-7/8 in) with the ET-D75LE40
126 mm (4-31/32 in) with the ET-D75LE4
254 mm (10 in) with the ET-D75LE8
203 mm (7 in) with the ET-D75LE50
202 mm (7-15/16 in) with the ET-D75LE5
*2 Adjustable in 40 mm (1-9/16 in) steps.

NOTE:

• Illustrations show the projector installed using optional ceiling mount bracket ET-PKD310H and an optional lens.
• This illustration is not drawn to scale.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 16:10)



NOTE:
• The value for L (distance to screen) varies slightly within ±5 % depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• When the fixed-focus lens is mounted, the optical lens shift function cannot be used.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.


Projection distance (screen aspect ratio 16:9)Projection distance (screen aspect ratio 16:9)


NOTE:
• The value for L (distance to screen) varies slightly within ±5 % depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• When the fixed-focus lens is mounted, the optical lens shift function cannot be used.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.



Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 10 Zoom lenses

  ET-D75LE6 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0201 – 0.0566
L (m) = (diagonal screen size in inches) × 0.0241 – 0.0736

  ET-D75LE10 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0284 – 0.0857
L (m) = (diagonal screen size in inches) × 0.0367 – 0.1085

  ET-D75LE20 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0364 – 0.0832
L (m) = (diagonal screen size in inches) × 0.0528 – 0.1162

  ET-D75LE30 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0524 – 0.1131
L (m) = (diagonal screen size in inches) × 0.1017 – 0.1765

  ET-D75LE40 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1004 – 0.1577
L (m) = (diagonal screen size in inches) × 0.1601 – 0.1615

  ET-D75LE4 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1003 – 0.1158
L (m) = (diagonal screen size in inches) × 0.1595 – 0.1013

  ET-D75LE8 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1595 – 0.3862
L (m) = (diagonal screen size in inches) × 0.2989 – 0.3598

  Fixed-focus lens

  ET-D75LE50   L (m) = (diagonal screen size in inches) × 0.0154 – 0.0713

  ET-D75LE5   L (m) = (diagonal screen size in inches) × 0.0154 – 0.0835

Aspect ratio 16 : 9 Zoom lenses

  ET-D75LE6 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0207 – 0.0566
L (m) = (diagonal screen size in inches) × 0.0248 – 0.0736

  ET-D75LE10 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0292 – 0.0857
L (m) = (diagonal screen size in inches) × 0.0377 – 0.1085

  ET-D75LE20 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0374 – 0.0832
L (m) = (diagonal screen size in inches) × 0.0543 – 0.1162

  ET-D75LE30 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0539 – 0.1131
L (m) = (diagonal screen size in inches) × 0.1045 – 0.1765

  ET-D75LE40 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1032 – 0.1577
L (m) = (diagonal screen size in inches) × 0.1645 – 0.1615

  ET-D75LE4 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1031 – 0.1158
L (m) = (diagonal screen size in inches) × 0.1639 – 0.1013

  ET-D75LE8 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1640 – 0.3862
L (m) = (diagonal screen size in inches) × 0.3072 – 0.3598

  Fixed-focus lens

  ET-D75LE50   L (m) = (diagonal screen size in inches) × 0.0159 – 0.0713

  ET-D75LE5   L (m) = (diagonal screen size in inches) × 0.0158 – 0.0835

NOTE:
• Distances calculated with the above equations will include slight deviations.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.
  PT-DS8500 / DS100X

Standard setting-up positions
unit : mm (inch)
L: Distance to screen
H: Height from the edge of screen to center of lens

*1 When the lens protrudes to the maximum.
212 mm (8-11/32 in) with the ET-D75LE6
125 mm (4-29/32 in) with the ET-D75LE10
121 mm (4-3/4 in) with the ET-D75LE20
121 mm (4-3/4 in) with the ET-D75LE30
124 mm (4-7/8 in) with the ET-D75LE40
126 mm (4-31/32 in) with the ET-D75LE4
254 mm (10 in) with the ET-D75LE8
203 mm (7 in) with the ET-D75LE50
202 mm (7-15/16 in) with the ET-D75LE5
*2 Adjustable in 40 mm (1-9/16 in) steps.


NOTE:

• Illustrations show the projector installed using optional ceiling mount bracket ET-PKD310H and an optional lens.
• This illustration is not drawn to scale.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 4:3)



NOTE:
• The value for L (distance to screen) varies slightly within ±5 % depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• When the fixed-focus lens is mounted, the optical lens shift function cannot be used.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.



Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 4 : 3 Zoom lenses

  ET-D75LE6 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0207 – 0.0566
L (m) = (diagonal screen size in inches) × 0.0248 – 0.0736

  ET-D75LE10 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0290 – 0.0857
L (m) = (diagonal screen size in inches) × 0.0375 – 0.1085

  ET-D75LE20 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0371 – 0.0832
L (m) = (diagonal screen size in inches) × 0.0540 – 0.1162

  ET-D75LE30 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0536 – 0.1131
L (m) = (diagonal screen size in inches) × 0.1039 – 0.1765

  ET-D75LE40 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1026 – 0.1577
L (m) = (diagonal screen size in inches) × 0.1635 – 0.1615

  ET-D75LE4 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1031 – 0.1158
L (m) = (diagonal screen size in inches) × 0.1639 – 0.1013

  ET-D75LE8 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1640 – 0.3862
L (m) = (diagonal screen size in inches) × 0.3072 – 0.3598

  Fixed-focus lens

  ET-D75LE50   L (m) = (diagonal screen size in inches) × 0.0158 – 0.0713

  ET-D75LE5   L (m) = (diagonal screen size in inches) × 0.0158 – 0.0835


NOTE:
• Distances calculated with the above equations will include slight deviations.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.
  PT-DW8300 / DW90X

Standard setting-up positions
unit : mm (inch)
L: Distance to screen
H: Height from the edge of screen to center of lens

*1 When the lens protrudes to the maximum.
212 mm (8-11/32 in) with the ET-D75LE6
125 mm (4-29/32 in) with the ET-D75LE10
121 mm (4-3/4 in) with the ET-D75LE20
121 mm (4-3/4 in) with the ET-D75LE30
124 mm (4-7/8 in) with the ET-D75LE40
126 mm (4-31/32 in) with the ET-D75LE4
254 mm (10 in) with the ET-D75LE8
203 mm (7 in) with the ET-D75LE50
202 mm (7-15/16 in) with the ET-D75LE5
*2 Adjustable in 40 mm (1-9/16 in) steps.

NOTE:

• Illustrations show the projector installed using optional ceiling mount bracket ET-PKD310H and an optional lens.
• This illustration is not drawn to scale.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.

Caution:
All construction work should be done by a qualified technician.
  When mounting to the ceiling, use the special mounting bracket. To prevent the projector from swaying or dropping, attach the wire that is included with the projector between the mounting bracket and the ceiling.


Projection distance (screen aspect ratio 16:9)



NOTE:
• The value for L (distance to screen) varies slightly within ±5 % depending on the zoom lens characteristics.
• At the shortest projection distance, the zoom lens characteristics may cause slight image distortion.
• When vertical keystone correction is used, the image is corrected in the direction that reduces its projected size.
• When the fixed-focus lens is mounted, the optical lens shift function cannot be used.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.



Calculation of the projection distance
For a screen size different from the above, use the equation below to calculate the projection distance.

Aspect ratio 16 : 9 Zoom lenses

  ET-D75LE6 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0231 – 0.0566
L (m) = (diagonal screen size in inches) × 0.0277 – 0.0736

  ET-D75LE10 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0324 – 0.0857
L (m) = (diagonal screen size in inches) × 0.0419 – 0.1085

  ET-D75LE20 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0415 – 0.0832
L (m) = (diagonal screen size in inches) × 0.0602 – 0.1162

  ET-D75LE30 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.0598 – 0.1131
L (m) = (diagonal screen size in inches) × 0.1160 – 0.1765

  ET-D75LE40 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1145 – 0.1577
L (m) = (diagonal screen size in inches) × 0.1826 – 0.1615

  ET-D75LE4 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1151 – 0.1158
L (m) = (diagonal screen size in inches) × 0.1831 – 0.1013

  ET-D75LE8 minimum
maximum
L (m) = (diagonal screen size in inches) × 0.1831 – 0.3862
L (m) = (diagonal screen size in inches) × 0.3430 – 0.3598

  Fixed-focus lens

  ET-D75LE50   L (m) = (diagonal screen size in inches) × 0.0176 – 0.0713

  ET-D75LE5   L (m) = (diagonal screen size in inches) × 0.0176 – 0.0835

NOTE:
• Distances calculated with the above equations will include slight deviations.
• The optional lenses ET-D75LE4/D75LE5 were discontinued.