PT-DZ8700/DZ110X Series

3-Chip DLP™ Projector PT-DZ8700/DZ110X, PT-DS8500/DS100X, PT-DW8300/DW90X
Specifications
  PT-DZ8700/DZ110X

  PT-DZ8700/DZ110X
DLP™ chip Panel size 24.4 mm (0.96") diagonal, 16:10 aspect ratio
Display method DLP™ chip x 3 (R, G, B), DLP™ projection system
Pixels 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
Lamp 355 W UHM lamp x 2 (dual lamp system)
Brightness*1 10,600 lumens (dual lamp, high mode)
Contrast ratio*1 10,000:1 (full on/full off, in Dynamic iris mode 3)
Resolution 1,920 x 1,200 pixels
Lens Optional powered zoom/focus lenses
Screen size 1.78-15.24 m (70-600 inches)*2 (16:10 aspect ratio)
Optical axis shift Vertical: ±55% (±44% with the ET-D75LE6) from center of screen, powered
Horizontal: ±20% (±15% with the ET-D75LE6) from center of screen, powered
Scanning frequency HDMI/DVI-D/RGB Horizontal: 15 -100 kHz, vertical: 24 - 120 Hz,
dot clock: 162 MHz or lower
YPBPR (YCBCR) 525i (480i) : fH 15.75 kHz; fV 60 Hz
625i (576i) : fH 15.63 kHz; fV 50 Hz
525p (480p) : fH 31.50 kHz; fV 60 Hz
625p (576p) : fH 31.25 kHz; fV 50 Hz
750 (720)/60p : fH 45.00 kHz; fV 60 Hz
750 (720)/50p : fH 37.50 kHz; fV 50 Hz
1035/60i : fH 33.75 kHz; fV 60 Hz
1125 (1080)/60i : fH 33.75 kHz; fV 60 Hz
1125 (1080)/50i : fH 28.13 kHz; fV 50 Hz
1080/25p : fH 28.13 kHz; fV 25 Hz
1080/24p : fH 27.00 kHz; fV 24 Hz
1080/24sF : fH 27.00 kHz; fV 48 Hz
1080/30p : fH 33.75 kHz; fV 30 Hz
1080/60p : fH 67.50 kHz; fV 60 Hz
1080/50p : fH 56.25 kHz; fV 50 Hz
S-Video/Video Horizontal: 15.75/15.63 kHz, vertical: 50/60 Hz
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Terminals SDI IN BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
HDMI IN HDMI 19-pin x 1
Deep Color, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), dot clock: 25 -162 MHz
DVI-D IN DVI-D 24-pin x 1
DVI 1.0 compliant, compatible with HDCP, compatible with single link only,
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 - 162 MHz
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
SERIAL IN D-sub 9-pin (female) x 1 (for external control, RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 (for link control, RS-232C compliant)
REMOTE 1 IN M3 jack x 1 (for wired remote control)
REMOTE 1 OUT M3 jack x 1 (for link control)
REMOTE 2 IN D-sub 9-pin (female) x 1 (for external control, contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Keystone correction range Vertical: ±40°
(±22° with the ET-D75LE50/D75LE5*4, ±28° with the ET-D75LE6)*5,
horizontal: ±15° (±10° with the ET-D75LE6)*5
Installation Ceiling/floor, front/rear
Power cord length 3.0 m (9 ft 10 in)
Power supply PT-DZ8700
(North America)
120 V AC, 9.5 A, 60 Hz
PT-DZ110X
(Europe and Asia)
220-240 V AC, 5.0 A, 50/60 Hz
Power consumption PT-DZ8700
(North America)
970 W (1,000 VA)
(0.2 W with standby mode set to ECO*6. 6 W with standby mode set to NORMAL. Both with fan stopped.)
PT-DZ110X
(Europe and Asia)
920 W (980 VA at 240 V)
(0.3 W with standby mode set to ECO*6. 8 W with standby mode set to NORMAL. Both with fan stopped.)
Dimensions (W x H x D) 530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches)
(with legs at shortest position, optional lens not included)
Weight Approximately 24 kg (52.9 lb) without lens
Operating temperature*7 0°C-45°C (32°F-113°F)
Operating humidity 10%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless/wired remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia)x 2, safety wire rope

*1:  Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2:  1.78-7.62 m (70-300 inches) with the ET-D75LE50/D75LE5*4.
*3:  WUXGA resolution is supported only when the signals are compliant with VESA CV T-RB (Coordinated Video Timing-Reduced Blanking).
*4:  The optional lenses ET-D75LE4/D75LE5 were discontinued.
*5:  When using only the KEYSTONE correction. When using both the KEYSTONE and ARC corrections of the Geometric Adjustment function: vertical ±5°, horizontal ±5° (vertical ±10° and horizontal ±15° with the ET-D75LE40/D75LE4*4/D75LE8).
*6: With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only cer tain commands can be received for external control using the serial terminal.
*7:

The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).

  PT-DS8500/DS100X

  PT-DS8500/DS100X
DLP™ chip Panel size 24.1 mm (0.95") diagonal, 4:3 aspect ratio
Display method DLP™ chip x 3 (R, G, B), DLP™ projection system
Pixels 1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels
Lamp 355 W UHM lamp x 2 (dual lamp system)
Brightness*1 10,600 lumens (dual lamp, high mode)
Contrast ratio*1 10,000:1 (full on/full off, in Dynamic iris mode 3)
Resolution 1,400 x 1,050 pixels
(Input signals that exceed this resolution will be converted to 1,400 x 1,050 pixels.)
Lens Optional powered zoom/focus lenses 
Screen size 1.78-15.24 m (70-600 inches)*2 (4:3 aspect ratio)
Optical axis shift Vertical: ±50% (±40% with the ET-D75LE6) from center of screen, powered
Horizontal: ±30% (±20% with the ET-D75LE6) from center of screen, powered
Scanning frequency HDMI/DVI-D/RGB Horizontal: 15 - 100 kHz, vertical: 24 - 120 Hz,
dot clock: 162 MHz or lower
YPBPR (YCBCR) 525i (480i) : fH 15.75 kHz; fV 60 Hz
625i (576i) : fH 15.63 kHz; fV 50 Hz
525p (480p) : fH 31.50 kHz; fV 60 Hz
625p (576p) : fH 31.25 kHz; fV 50 Hz
750 (720)/60p : fH 45.00 kHz; fV 60 Hz
750 (720)/50p : fH 37.50 kHz; fV 50 Hz
1035/60i : fH 33.75 kHz; fV 60 Hz
1125 (1080)/60i : fH 33.75 kHz; fV 60 Hz
1125 (1080)/50i : fH 28.13 kHz; fV 50 Hz
1080/25p : fH 28.13 kHz; fV 25 Hz
1080/24p : fH 27.00 kHz; fV 24 Hz
1080/24sF : fH 27.00 kHz; fV 48 Hz
1080/30p : fH 33.75 kHz; fV 30 Hz
1080/60p : fH 67.50 kHz; fV 60 Hz
1080/50p : fH 56.25 kHz; fV 50 Hz
S-Video/Video Horizontal: 15.75/15.63 kHz, vertical: 50/60 Hz
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Terminals SDI IN BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YPBPR 4:2:2 10-bit): SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
HDMI IN HDMI 19-pin x 1
Deep Color, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), dot clock: 25 - 162 MHz
DVI-D IN DVI-D 24-pin x 1
DVI 1.0 compliant, compatible with HDCP, compatible with single link only,
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 - 162 MHz
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
SERIAL IN D-sub 9-pin (female) x 1 (for external control, RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 (for link control, RS-232C compliant)
REMOTE 1 IN M3 jack x 1 (for wired remote control)
REMOTE 1 OUT M3 jack x 1 (for link control)
REMOTE 2 IN D-sub 9-pin (female) x 1 (for external control, contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Keystone correction range Vertical: ±40°
(±22° with the ET-D75LE50/D75LE5*4, ±28° with the ET-D75LE6)*5,
horizontal: ±15° (±10° with the ET-D75LE6)*5
Installation Ceiling/floor, front/rear
Power cord length 3.0 m (9 ft 10 in)
Power supply PT-DS8500
(North America)
120 V AC, 9.0 A, 60 Hz
PT-DS100X
(Europe and Asia)
220-240 V AC, 4.8 A, 50/60 Hz
Power consumption PT-DS8500
(North America)
920 W (970 VA)
(0.2 W with standby mode set to ECO*6. 6 W with standby mode set to NORMAL. Both with fan stopped.)
PT-DS100X
(Europe and Asia)
900 W (950 VA at 240 V)
(0.3 W with standby mode set to ECO*6. 8 W with standby mode set to NORMAL. Both with fan stopped.)
Dimensions (W x H x D) 530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches)
(with legs at shortest position, optional lens not included)
Weight Approximately 24 kg (52.9 lb) without lens
Operating temperature*7 0°C-45°C (32°F-113°F)
Operating humidity 10%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless/wired remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia)x 2, safety wire rope

*1:  Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2:  1.78-7.62 m (70-300 inches) with the ET-D75LE50/D75LE5*4.
*3:  WUXGA resolution is supported only when the signals are compliant with VESA CV T-RB (Coordinated Video Timing-Reduced Blanking).
*4:  The optional lenses ET-D75LE4/D75LE5 were discontinued.
*5:  When using only the KEYSTONE correction. When using both the KEYSTONE and ARC corrections of the Geometric Adjustment function: vertical ±5°, horizontal ±5° (vertical ±10° and horizontal ±15° with the ET-D75LE40/D75LE4*4/D75LE8).
*6: With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only cer tain commands can be received for external control using the serial terminal.
*7: The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).
  PT-DW8300/DW90X

  PT-DW8300/DW90X
DLP™ chip Panel size 21.6 mm (0.85") diagonal, 16:9 aspect ratio
Display method DLP™ chip x 3 (R, G, B), DLP™ projection system
Pixels 1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
Lamp 355 W UHM lamp x 2 (dual lamp system)
Brightness*1 9,600 lumens (dual lamp, high mode)
Contrast ratio*1 10,000:1 (full on/full off, in Dynamic iris mode 3)
Resolution 1,366 x 768 pixels
(Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.)
Lens Optional powered zoom/focus lenses 
Screen size 1.78-15.24 m (70-600 inches)*2 (16:9 aspect ratio)
Optical axis shift Vertical: ±70% (±60% with the ET-D75LE6) from center of screen, powered
Horizontal: ±30% (±20% with the ET-D75LE6) from center of screen, powered
Scanning frequency HDMI/DVI-D/RGB Horizontal: 15 - 100 kHz, vertical: 24 - 120 Hz,
dot clock: 162 MHz or lower
YPBPR (YCBCR) 525i (480i) : fH 15.75 kHz; fV 60 Hz
625i (576i) : fH 15.63 kHz; fV 50 Hz
525p (480p) : fH 31.50 kHz; fV 60 Hz
625p (576p) : fH 31.25 kHz; fV 50 Hz
750 (720)/60p : fH 45.00 kHz; fV 60 Hz
750 (720)/50p : fH 37.50 kHz; fV 50 Hz
1035/60i : fH 33.75 kHz; fV 60 Hz
1125 (1080)/60i : fH 33.75 kHz; fV 60 Hz
1125 (1080)/50i : fH 28.13 kHz; fV 50 Hz
1080/25p : fH 28.13 kHz; fV 25 Hz
1080/24p : fH 27.00 kHz; fV 24 Hz
1080/24sF : fH 27.00 kHz; fV 48 Hz
1080/30p : fH 33.75 kHz; fV 30 Hz
1080/60p : fH 67.50 kHz; fV 60 Hz
1080/50p : fH 56.25 kHz; fV 50 Hz
S-Video/Video Horizontal: 15.75/15.63 kHz, vertical: 50/60 Hz
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Terminals HDMI IN HDMI 19-pin x 1
Deep Color, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), dot clock: 25 - 162 MHz
DVI-D IN DVI-D 24-pin x 1
DVI 1.0 compliant, compatible with HDCP, compatible with single link only, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 -162 MHz
RGB 1 IN BNC x 5 (RGB/YPBPR/YCBCR x 1)
RGB 2 IN D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN BNC x 1 (composite video)
S-VIDEO IN Mini DIN 4-pin x 1 (S-Video)
SERIAL IN D-sub 9-pin (female) x 1 (for external control, RS-232C compliant)
SERIAL OUT D-sub 9-pin (male) x 1 (for link control, RS-232C compliant)
REMOTE 1 IN M3 jack x 1 (for wired remote control)
REMOTE 1 OUT M3 jack x 1 (for link control)
REMOTE 2 IN D-sub 9-pin (female) x 1 (for external control, contact control)
LAN RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Keystone correction range Vertical: ±40°
(±22° with the ET-D75LE50/D75LE5*4, ±28° with the ET-D75LE6)*5,
horizontal: ±15° (±10° with the ET-D75LE6)*5
Installation Ceiling/floor, front/rear
Power cord length 3.0 m (9 ft 10 in)
Power supply PT-DW8300
(North America)
120 V AC, 9.0 A, 60 Hz
PT-DW90X
(Europe and Asia)
220-240 V AC, 4.8 A, 50/60 Hz
Power consumption PT-DW8300
(North America)
920 W (970 VA)
(0.2 W with standby mode set to ECO*6. 6 W with standby mode set to NORMAL. Both with fan stopped.)
PT-DW90X
(Europe and Asia)
900 W (950 VA at 240 V)
(0.3 W with standby mode set to ECO*6. 8 W with standby mode set to NORMAL. Both with fan stopped.)
Dimensions (W x H x D) 530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches)
(with legs at shortest position, optional lens not included)
Weight Approximately 24 kg (52.9 lb) without lens
Operating temperature*7 0°C-45°C (32°F-113°F)
Operating humidity 10%-80% (no condensation)
Supplied accessories Power cord with security lock, wireless/wired remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia)x 2, safety wire rope

*1:  Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*2:  1.78-7.62 m (70-300 inches) with the ET-D75LE50/D75LE5*4.
*3:  WUXGA resolution is supported only when the signals are compliant with VESA CV T-RB (Coordinated Video Timing-Reduced Blanking).
*4:  The optional lenses ET-D75LE4/D75LE5 were discontinued.
*5:  When using only the KEYSTONE correction. When using both the KEYSTONE and ARC corrections of the Geometric Adjustment function: vertical ±5°, horizontal ±5° (vertical ±10° and horizontal ±15° with the ET-D75LE40/D75LE4*4/D75LE8).
*6: With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only cer tain commands can be received for external control using the serial terminal.
*7:

The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)).



NOTES ON USE
Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock.
The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use.
3 The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions.
• Never place objects on top of the projector while it is operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0°C (32°F) and 35°C (95°F). Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
4 If the projector is to be operated continuously 24 hours a day, use the multi-lamp optical system's alternating lamp operation (lamp changer) function. The projector can be operated continuously 24 hours a day in four-lamp operation mode, but it will automatically operate with three lamps for 8 hours of the 24 hours.
5 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
6 Because the ET-D75LE50/D75LE5*4 is a fixed short-throw lens, the lens shift function cannot be used with it.
Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.