PT-ST10

LCD Projector PT-ST10
High Basic Performance
The New Lamp Drive System Enables a 5,000-hour* Lamp Replacement Cycle

Panasonic employs a number of advanced technologies – including a proprietary lamp drive system – that help maintain lamp performance. This has resulted in a 5,000-hour* lamp replacement cycle. It helps saving operating cost by providing longer usage between lamp replacements.

* This value is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals.
Intelligent Power Management Function Allows Resistance to Sudden Voltage Fluctuations*1

Momentary power outages*2 or voltage drops*3 can cause the projector to shut down, interrupting the projection. The PT-ST10 equipped with the Intelligent Power Management function controls the power supply to cope with power fluctuations, to enable continued projection.

*1 Fluctuations may occur in the electricity power supply except the power outage.
*2 Continuing 0V power supply during several tens of milliseconds.
*3 Power supply voltage reduction. Excluding momentary power outage.
Low Standby Power Consumption of 0.4 W*1 Helps the Environment

The ecological design of the PT-ST10 greatly reduces its environmental impact. In Eco Standby mode, power consumption is only 0.4 W*1. As examples of other environmental design features, the uncoated cabinet uses no halogenated flame retardants, the lens uses lead-free glass, and an Auto Off Timer switches the projector to Standby mode when no input signal is received for a preset time. The PT-ST10 also complies with the standards of the RoHS Directive*2.

*1 In Eco Standby mode, network functions such as Standby On via LAN are not available, and only certain commands can be received from RS-232C control.
*2 Restriction of the use of certain Hazardous Substances. The specified toxic substances used in the electrical and electronic equipment that is manufactured and distributed within Europe are controlled (the six substances are lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl esters (PBDE)), and all Panasonic projectors comply with the standards of the European RoHS Directive.

The Daylight View Basic Function Ensures Clear Images Even in Brightly Lit Rooms

Panasonic's Daylight View Basic technology achieves sharp, easy-to-see images by clearly reproducing the details in dark image areas, which were previously difficult to see in brightly lit rooms. A built-in sensor measures the ambient light, and the Daylight View Basic function adjusts the halftone color and brightness level according to the surrounding illumination.

Use a Whiteboard to Project Images in Classrooms with no Screens.

Projecting onto a whiteboard normally causes viewers to experience glare. However, the Panasonic Whiteboard mode reduces glare while also properly reproducing images.

Quiet 29-dB* Design Helps to Hold
Viewers' Attention

The noise level is as low as 29-dB*. This helps your audience to keep their attention on the discussion or on the screen images during quiet scenes.

* Lamp mode : Eco