PT-ST10

LCD Projector PT-ST10
Specifications

  PT-ST10
Power supply 100–240 V AC, 50/60 Hz
Power consumption 300 W (0.4 W*1 in eco standby mode. 15 W in normal standby mode. 18 W in normal standby mode when set to audio monitor out and with fan stopped.)
Optical system Dichroic mirror separation/prism synthesis system
LCD panel Panel size 16 mm (0.63") diagonal, 4:3 aspect ratio
Display method Transparent LCD panel (x 3, R/G/B)
Drive method Active matrix
Pixels 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
Pixel configuration Stripe
Lens Fixed, manual focus, F 1.80, f 6.74 mm
Lamp 220 W UHM lamp
Projection size 1.52-2.79 m(60-110 inches) (4:3 aspect ratio)
Colors Full color (16,777,216 colors)
Brightness*2 2,800 lumens
Center-to-corner
uniformity ratio*2
85%
Contrast ratio*2 500:1 (full on/full off)
Resolution (RGB)*3 1,024 x 768 pixels (Input signals that exceed this resolution will be
converted to 1,024 x 768 pixels.)
Scanning frequency RGB Horizontal: 15–91 kHz, Vertical: 50–85 Hz
YPBPR 480i (525i): fH 15.75 kHz; fv 60 Hz
576i (625i): fH 15.63 kHz; fv 50 Hz
480p (525p): fH 31.50 kHz; fv 60 Hz
576p (625p): fH 31.25 kHz; fv 50 Hz
720 (750)/60p: fH 45.00 kHz; fv 60 Hz
720 (750)/50p: fH 37.50 kHz; fv 50 Hz
1080 (1125)/60i: fH 33.75 kHz; fv 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fv 50 Hz
1080 (1125)/60p: fH 67.50 kHz; fv 60 Hz
1080 (1125)/50p: fH 56.25 kHz; fv 50 Hz
S-Video/
Video
NTSC, NTSC4.43, PAL-M, PAL60: fH15.75 kHz; fv 60 Hz
PAL, SECAM, PAL-N: fH15.63 kHz; fv 50 Hz
Optical axis shift 10:-0.5 (fixed)
Keystone correction range Vertical: approx. ±10°
On-screen menu 17 languages: English, French, German, Spanish, Italian, Korean, Russian, Chinese, Japanese, Swedish, Norwegian, Danish, Portuguese, Polish, Hungarian, Czech, and Thai
Installation Front/rear, ceiling/desk (menu selection)
Built-in speakers 4cm-2cm (1-1/16”-25/32”) (oval) x 1
Terminals COMPUTER (RGB) 1 IN D-sub HD 15-pin (female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V [p-p] for sync on green signals), 75 ohms, R, B: 0.7 V [p-p], 75 ohms, HD/SYNC, VD: TTL (positive/negative polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75 ohms, PB, PR: 0.7 V [p-p], 75 ohms
COMPUTER (RGB) 2 IN D-sub HD 15-pin (female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V [p-p] for sync on green signals), 75 ohms, R, B: 0.7 V [p-p], 75 ohms, HD/SYNC, VD: TTL (positive/negative polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75 ohms, PB, PR: 0.7 V [p-p], 75 ohms
VIDEO IN RCA pin x 1, 1.0 V [p-p], 75 ohms
S-VIDEO IN Mini DIN 4-pin x 1, Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 ohms
AUDIO IN M3 (L, R) x 2, 0.5 V [rms]
VARIABLE AUDIO OUT M3 (L, R) x 1, 0 –2.0 V [rms]
SERIAL D-sub 9-pin x 1, for external control (RS-232C compliant)
LAN RJ-45 x 1, compatible with PJLink™ (class 1), 10BASE-T/100BASE-TX
Power cord length 4.4 m (14.4')
Cabinet material Moulded plastic (PC+ABS)
Dimensions (W x H x D)*4 327 x 135 x 307 mm (12-7/8"x5-5/16"x12-3/32”)
Weight*5 Approx. 3.1 kg (6.8 lbs.)
Operating environment Temperature: 0°–40°C (32°–104°F) *6
Humidity: 20%–80% (no condensation)
Supplied accessories Power cord, Power cord secure lock, Wireless remote control, Batteries for remote control ( AAA type for North/South America, R03 type for Europe/Asia) x2, VGA cable, Application software (CD-ROM), safety wire rope
Optional accessories ET-PKB2 Ceiling mount bracket
ET-KFB2 Highly durable filter unit
ET-RFB2 Replacement air filter for ET-KFB2
ET-LAB2 Replacement lamp unit


*1:  In eco standby mode, network functions such as Standby On via LAN are not available, and only certain commands can be received from RS-232C control.
*2:  Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*3:  Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.
*4:  Protruding parts not included.
*5: Average value (excluding lens cap). May differ depending on models.
*6: The operating temperature range is 0°C (32°F) to 35°C (95°F) when used in High-Altitude mode (1,400 to 2,700 m (4,593 to 8,858 feet)). Also, in Lamp Normal mode, if the ambient temperature exceeds 35°C/95°F (30°C/85°F in High-Altitude mode), the light output may be reduced approximately 30% to protect the projector.

NOTES ON USE
•  The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
•  The brightness of the lamp will gradually decrease with use.
The projector includes consumable parts. The frequency of replacement for the lamp and other consumable parts will increase if the projector is subjected to extended, continuous use. For details, please consult a service representative.