Main Contents begins from here.

Support

Network Camera

Faq Contents

--- Category [Update]: 2 hit ---

[No.1 - No.2] / 1
No.1 What should I do if the firmware update fails? [Update] [Troubleshoot: KX_HCM]
(2004/04/21)

Answer... The firmware updating is now in process.
  1. Confirm the indicator.
  2. If the Indicator continues flashing green (HCM1/2) or orange (other models), follow these steps.
    1. Push the refresh button on the browser.
    2. If there is no improvement, input "http://***.***.***.***/cgiBootFiramwareVersionUp" and push the enter key.
    3. If the [Update Firmware] screen is displayed, update the firmware completely in reference to the operating instructions.
  3. If there is no improvement in symptoms, turn the camera off/on, and then try the setup again.
The firmware updating is done a number of times.
  1. Confirm the indicator.
  2. If the Indicator continues flashing green (HCM1/2) or orange (other models), follow these steps.
    1. Input the URL of the [Update Firmware] screen directly and push the enter key.
    2. If there is no improvement, press the FACTORY DEFAULT RESET button to reset the camera and input "http://192.168.0.253".
    3. If you can not access to the [Update Firmware] screen, input "http://***.***.***.***/cgiBootFiramwareVersionUp" and push the enter key.
    4. If the [Update Firmware] screen is displayed, update the firmware completely in reference to the operating instructions.
  3. If there is no improvement in symptoms, turn the camera off/on, and then try the setup again.

No.2 How do I confirm the version of ActiveX? [Update]
(2003/06/27)
Answer... You can confirm that according to the following procedures.
  1. [Start]->[Setup]->[Control panel]->[Java plug-in]
  2. Select the [about Java plug-in] tab.


[No.1 - No.2] / 1

Banner area begins from here.