Main Contents begins from here.

Support

Network Camera

Faq Contents


How do I make a Network Camera KX-HCM270 switch between wireless and wired mode? [Setup: Network]
(2005/10/13)

Answer... To switch to wireless communication mode, turn off the power, disconnect the Ethernet cable, and then turn on the power again.
The KX-HCM270 sets itself to wireless or wired communication mode automatically when its power is turned on. If the Network Camera detects network activity through its Ethernet port, wired mode is automatically selected. When no Ethernet cable is connected, or if the PC or hub is turned off when the Network Camera is powered up, wireless mode is selected.
The communication mode can be switched only by powering the camera down then up again; you cannot switch to wireless mode by disconnecting the Ethernet cable during operation.

Banner area begins from here.