Main Contents begins from here.

Support

Network Camera

Faq Contents


Camera Quick Setup fails. [Troubleshoot: BL_WV10]
(2005/08/01)

Answer...
  1. [Cause1]
    Are you following the procedures shown in "Connecting a camera"?
    [Solution1]
    If registration fails, re-initialize the camera, turn the BL-WV10 off and then on again, and re-perform Quick Setup.

  2. [Cause2]
    If you're using the BB-HGW700, is an Ethernet cable connecting it to the BL-WV10?
    [Solution2]
    Connect BL-WV10 to BB-HGW700 with an Ethernet cable.

  3. [Cause3]
    If you're using the BB-HGW700, are its camera settings accurate?
    [Solution3]
    Confirm the camera settings of BB-HGW700.


Banner area begins from here.