Main Contents begins from here.

Support

Network Camera

Faq Contents


The remote control doesn't work. [Troubleshoot: BL_WV10]
(2005/08/01)

Answer...
  1. Check to see if the batteries are good and installed correctly.
  2. Make sure the remote control is not in direct sunlight.
  3. Make sure there is no obstruction (including colored glass in a rack door) between the remote control and the receptor.
  4. Check the mode switch on the back of the BL-WV10. Set the mode switch to normal and turn the power on again.


Banner area begins from here.