Network Camera

The wireless device cannot be connected. [Setup: wireless]
(2004/10/06)

Answer...

[Cause1] Check the PC wireless LAN card's communication mode to Infrastructure. The device-specific SSID and 128-bit encryption key are set in factory default. The default SSID and 128 bit encryption key are displayed on the rear of this product. [Solution1] Set the same SSID and 128-bit encryption key as those on the wireless devices connected to this product. [Cause2] Is the wireless network mode set to "802.11a" on the wireless device? [Solution2] Set the wireless network mode to 802.11b or 802.11g. [Cause3] It is possible that this product or the wireless device may be out of range, or there is a wall or other obstacle in between them. [Solution3] Move them closer together. [Note:] If you will operate this product in the repeater mode, restart the wireless device after this product and BB-HGW700 were turned on. If you will not use BB-HGW700 and/or use other router, you can operate this product in the access point mode. [Solution4] If the network configuration was changed, for example the connection between the device and this product was changed form wireless LAN to fixed LAN, restart this product.