Network Camera

You selected Linksys BEFW11S4.

Follow the steps below and configure the router.

Open the router's configuration web page by typing the following address on your web browser or just click the link.

http://192.168.1.1

This is the factory default local IP address for this router. If you have changed the router's local IP address, please enter proper IP address.

You can also check the router's IP address on the Network Camera's Web Page at [Maintenance] -> [Status]. It is shown as "Default Gateway" IP address.

A password request screen appears. Type the User Name and Password and click [OK] to login.

*The default settings are
User ID: (leave black)
Password : admin
If you have changed the router's User ID and Password, please input the proper one.

The router configuration page appears.

Click [Administration] on the menu.

• Check [Enabled] for "UPnP".
• Check [Enabled] for "Allow users to make Configuration Changes".
• Check [Enabled] for "Allow users to Disable Internet Access".

The new settings are saved and your router's UPnP is turned on.

Please try Network Camera [Automatic Setup] procedure again.

If you need more information about this router, please read the router's manual or refer to manufacturer's Web site.

• Linksys "BEFW11S4" product information