Main Contents begins from here.
Products & Solutions
Pendant Type Microphone WX-LT310
Infrared Wireless Microphone (Pendant Type) WX-LT310

* Shipped with strap attached.
For hands-free convenience,
the WX-LT310 pendant type microphone
If both hands free is what you need, this microphone is perfect.
Infrared emitter, microphone and processor are combined in this all-in-one unit, for revolutionary, cable-free convenience.
So easy to wear, so easy to use
In contrast to conventional tie-pin microphones, this microphone is suspended around the neck.
It can be easily worn over clothes without pockets. Distance between mouth and microphone is also easy to adjust.

Use strap to hang microphone around neck
Adjust distance between microphone and mouth
Adjust volume from the microphone itself
The WX-LT310 is equipped with volume control buttons.
The volume of the microphones worn by the user or other person can be controlled*.
The volume control of the line input on the receiver is also available (Future Use).
* Controls two channels on the same receiver by switching MIC SELECT (OWN/OTHER).

4 channels supported by single microphone
This microphone adopts PLL synthesized system* which enables to switch among 4 different frequencies in a single microphone.
This allows for more flexible use.
* The infrared receiver does not adopt the PLL
synthesized system.

Channel switch
The channel switch makes it easy to choose from among all four channels.
External input terminal
This microphone is equipped with an external input terminal that can be used as a transmitter.
Sounds from voice recordings in language lessons or business presentations that use a PC, or other audio sources can widely be
broadcast via the infrared wireless microphone.
* The microphone cannot be used when connected to an external input.

External input terminal
Long battery life
The microphone can be run on readily available store-bought, Panasonic rechargeable AA batteries.*1
The batteries can be recharged without being removed from the microphone.*2
Also, energy-saving design makes it possible to use for approx. 6 consecutive hours, attaining the longest battery life in the industry. Household alkaline AA batteries can also be used as a secondary power source in case of an emergency.
*1 AA nickel-hydrogen rechargeable batteries
*2 The WX-LZ10 Charger Stand is needed.
Pursuit of clean sound
Conventional infrared wireless microphone systems produce muffled sound or crackling when the reception level falls, but Panasonic uses a unique system with a high S/N ratio to achieve clear sound and minimal noise interruption.
WX-LT310 Specifications
| Infrared Ray Wavelength | 850 nm |
|---|---|
| Number of Transmission Channel | 4 channels (Sub carrier frequencies) (1ch: 2.3 MHz, 2ch: 2.8 MHz, 3ch: 3.2 MHz, 4ch: 3.8 MHz) |
| Oscillation System | PLL Frequency Synthesizer Method |
| Reception Range | Approx. 20 m (Effective reception range 8m in radius from Infrared Sensor WX-LS100) |
| Condition | At the line of sight with using WX-LR100 & WX-LS100 |
| Microphone Type | Unidirectional ECM |
| Frequency Response | 100 Hz |
| External Input Level | 0 dBV |
| External Input Jack | Ø3.5 miniature Jack |
| Required Battery | AA type x 2, alkaline dry element battery or Nickel metal hydride rechargeable battery |
| Battery Capacity Alarm Indication (at Power LED with ON) |
Green: Normal Red: Required to change or charge batteries |
| Operation Time (at 25 °C, continuous use) |
Alkaline Battery: Approx. 5 hours Rechargeable Battery: Approx. 6 hours |
| Dimensions | Max. 77 mm (W) × 28 mm (D) × 102 mm (H) |
| Weight | Approx. 90 g (excluding batteries & Neck strap) |
| Finish | Silver metallic color (Control Panel), Blue metallic color (Microphone body) |
Brochure Download
Banner area begins from here.
Sub Menu begins from here.

